OUTDOOR & WEATHER-EXPOSED LIGHTING
Outdoor Stage Lights Built Around the Exposure
Begin with rain, dust, temperature, mounting and connection conditions. Then choose the optical role and verify the complete fixture—not one protected component.
PROTECTION CHAIN
Weather resistance is a complete-system requirement.
The housing, seals, connectors, cable entries, cooling, drainage and mounting orientation must work together.
Ingress path
Review enclosure joints, lenses, displays, vents and service covers.
Power and data
Review connector type, caps, cable routing and exposed connection points.
Thermal behavior
Review cooling, temperature range, sun exposure and reduced airflow conditions.
Mounting and drainage
Review orientation, rigging, standing water, wind and access for inspection.
EXPOSURE AUDIT
Match the rating to the real operating scenario.
Temporary rain, permanent exposure, coastal air, dust and heat create different risks.
Touring outdoor stage
Fast setup, exposed connectors, rain response, cases and repeatable inspections.
Fixed architectural position
Long-term seals, drainage, sun, corrosion, access and maintenance intervals.
Covered but exposed edge
Wind-driven rain, condensation and open cable paths can still reach the fixture.
OUTDOOR LIGHTING RANGE
Compare products in the context of the intended project.
Open the full model page to review documented specifications, configuration and application details.
OUTDOOR LIGHTING · RG-370
37×40W IP65 Waterproof Bee Eye Moving Head Light
IP65 bee eye moving head with 37 × 40W four-in-one LEDs, 10°–35° spot-angle range and 1800W maximum fixture power. Standard and pixel channel profiles…
- 37 × 40W 4-in-1 LEDs
- IP65
OUTDOOR LIGHTING · RG-118A
380W IP65 Die-Cast Beam Moving Head Light
A 380W IP65 die-cast beam moving head light for outdoor stage and event systems, with a 1.8° beam, two independent overlapping prisms and RDM.…
- OSRAM 371W or Philips 380W lamp; selectable order configuration
- IP65
OUTDOOR LIGHTING · RG-758
IP65 Outdoor Laser Projector in Four Power Options
IP65 outdoor laser projector with 20W, 30W, 50W and 100W output choices, 30–40Kpps scanning and PC/ILDA or DMX512 control.
- IP65
OUTDOOR LIGHTING · RG-371
19x40W IP65 Bee-Eye Moving Head Light
IP65 bee-eye moving head with 19 × 40W four-in-one LEDs, 8.5–45° spot angle, individual LED control and standard or 57/76CH pixel modes.
- 19 × 40W four-in-one LED beads
- IP65
ENVIRONMENTAL REVIEW GUIDE
Ask for evidence tied to the quoted fixture.
These concept images show what to review; they are not test or certification evidence. A label alone does not explain connectors, installation limits or maintenance.
Housing and seals
Show the complete enclosure, service covers and exposed interfaces.
Connector system
Show power and data connections, caps and the quoted cable arrangement.
Operating inspection
Show the exact fixture operating and the documented checks relevant to the order.
OUTDOOR RFQ
Describe exposure and installation—not just “waterproof”.
The quotation should define the complete operating context.
Exposure
Rain, dust, temperature, sun, salt air and operating duration.
Installation
Orientation, height, mounting, drainage, access and cable routes.
Lighting role
Beam, wash, profile, effect, coverage, throw and control.
Order scope
Quantity, voltage, connectors, cases, spares and destination.
OUTDOOR APPLICATIONS
Choose the optical role after the exposure is understood.
These concept scenes illustrate planning contexts. Outdoor models can still be beam, wash, profile, effect or architectural tools.
Festivals and touring
Plan fast rigging, weather response, cases, cables and replacement workflow.
Theme parks and attractions
Plan fixed positions, long operating periods, maintenance access and control.
Architecture and public events
Plan coverage, glare, mounting, drainage, local rules and service access.
BUYER FAQ
Resolve category-level decisions before comparing quotations.
Model-specific claims still need to be checked on the exact product and ordered sample.
What makes a stage light suitable for outdoor use?
The complete fixture must be designed and rated for the actual exposure, including the enclosure, connectors, cooling, cable entries and installation conditions.
Is an IP rating enough to choose an outdoor light?
It is an important starting point, but buyers should also confirm connectors, mounting orientation, temperature limits, drainage, maintenance and the exact optical role.
Can an indoor fixture be used outdoors under a cover?
A cover may not control wind-driven rain, condensation, heat or exposed connections. Use a complete solution assessed for the actual conditions.
What should rental companies inspect after outdoor use?
Follow the manufacturer instructions and inspect housing, lenses, seals, connectors, cables, rigging and signs of moisture or damage before the next deployment.
How should outdoor lighting be tested before a batch order?
Test the exact sample for optics, control, connections, thermal behavior and the documented environmental checks applicable to the configuration.
What information is needed for an outdoor-light quotation?
Provide exposure, temperature, mounting, connector and cable needs, optical role, control, quantity, voltage, cases, spares and destination.
Need to compare indoor and outdoor stage systems?
Explore Stage LightingBUYING DECISIONS
How do you specify an outdoor lighting order?
Choose the optical role and verify the exact complete fixture for the exposure. An outdoor lighting package needs suitable connections, distribution, mounting and operation as well as a fixture IP reference.
01ORDER CHECK
Select the role and exact version
For outdoor color coverage, shortlist an appropriate rated wash/PAR; for aerial beams, an appropriate rated moving head. Keep the source, optics and protection tied to the quoted model. An indoor fixture under a canopy is not automatically equivalent to an outdoor-rated version.
Compare the color-coverage role02ORDER CHECK
Describe the real exposure
State rain, dust, orientation, duration, coastal conditions where relevant and access. Ask what the IP reference covers and how connector seals and installation must be maintained. IP65 versus IP67 is not a general ranking of suitability for every site.
Check protection-rating boundaries03ORDER CHECK
Include the whole rig scope
Define voltage, plugs/connectors, local distribution, rigging responsibility, safety accessories, control cables, cases and service access. Agree setup, weather operation and recovery procedures with the responsible project team; a fixture quote is not the complete site engineering plan.
Prepare the electrical planning briefSTART YOUR PROJECT
Let’s Talk About
Your Project.
Tell us who you are, what products you need and your expected order size. Our team will review your requirements and recommend the right next step.