PERFORMANCE OVERVIEW
RGBW Stage Effect Light overview
Choose this RGBW pixel strobe light when the fixture face is part of the stage picture: twelve main lenses create color cells, a segmented white strobe adds flashes, and RGBW pixel lines add chases. It suits layered show cues rather than general front lighting. For DMX network planning, consult ESTA's DMX512-A guide and request this fixture's current channel chart.
12 × 60W RGBW
Twelve main RGBW LEDs deliver the primary approximately 15° output.
600W White Strobe
A pure-white strobe is divided into eight controllable segments for flowing effects.
32 × 3W Pixel Bar
RGBW pixels form an additional eight-segment linear color layer.
10 / 46 / 119CH
Choose a channel mode to match simple operation or detailed programming.
LAYERED OUTPUT
Color, white strobe and pixel motion can share the same cue.
The main RGBW lenses create the large visual cells. The central pure-white section adds high-contrast flashes, while the upper and lower pixel lines provide borders, chases and color transitions.
SEGMENTED PROGRAMMING
Scale control detail to the show and console.
Choose 10CH, 46CH or 119CH against the exact channel chart and cue list. On an otherwise empty 512-channel DMX universe, four fixtures in 119CH mode use 476 channels; non-overlapping start addresses can be 1, 120, 239 and 358. A fifth complete 119CH footprint would exceed that universe. Other fixtures and reserved addresses reduce the available space. Compare a lower-footprint mode or additional supported universe outputs when planning the array; mode-specific functions still depend on the supplied chart. DMX512, Auto, Sound and Master-Slave are listed.
PRODUCT DETAILS
Review the optical face, housing and rear connections.
The product views show the twelve lenses, three linear LED zones, ventilation, display, DMX connections and power input. Check rear access and connection clearance against the mounting layout, then confirm the supplied connectors and accessories for the order.
PRODUCT VIDEO
See the layered RGBW and strobe effects in motion.
Use the demonstration to review visible effect behavior and multi-zone programming. Confirm channel mode, voltage, installation and packing requirements for the final order.
SEAMLESS FIXTURE ARRAYS
Join multiple units into a wider, continuous visual surface.
The 620 × 220.4mm linear housing supports multi-unit splicing. Arrange fixtures side by side for synchronized rows, then choose the DMX footprint that matches the level of control required by the show.
PRODUCTION EVIDENCE
Real fixtures shown during assembly and powered checks.
The workshop photographs show rows of fixtures operating with different color and white-strobe combinations. Use them to identify the layered look you want, then review the video for motion and timing. Array mounting and power planning still depend on the actual installation.
Specifications
Technical specifications
| Public product power | 12 × 60W RGBW + 600W white strobe |
|---|---|
| Light source | 12 × 60W RGBW; 600W pure-white strobe; 32 × 3W RGBW pixel bar |
| Voltage | AC 100–240V, 50/60Hz |
| DMX channels | 10CH / 46CH / 119CH |
| Product dimensions | 620 × 220.4 mm |
| Net weight | 7.75 kg (verify before ordering) |
| Control modes | DMX512 / Auto / Sound / Master-Slave |
| Pixel control | 32 × 3W RGBW pixel bar, 8 segments |
| Strobe rate | 600W pure-white strobe, 8 segments |
| Zone control | 8-segment white strobe and 8-segment RGBW pixel bar |
APPLICATION FIT
Built for visible stage effects and synchronized fixture arrays.
For the planned installation, use this product where the fixture face, strobe accents and pixel motion form part of the stage picture. It is suitable for protected concert, club, festival, rental and event environments. No IP rating is included in the confirmed data, so outdoor exposure must not be assumed. Compare related stage effect lights when planning your lighting rig.
PACKING & ORDER DETAILS
Confirm programming, installation and logistics before quotation.
PRODUCT FAQ
Questions Before You Order.
Source configuration, control, installation and order planning.
What light sources are built into this stage effect light?
The fixture combines 12 × 60W RGBW main LEDs, a 600W pure-white strobe divided into eight segments, and a 32 × 3W RGBW pixel bar divided into eight segments.
What is the output angle of the main RGBW lenses?
The confirmed product data lists an approximately 15° output angle for the twelve main RGBW lenses.
Which DMX channel modes are available?
The listed modes are 10CH, 46CH and 119CH. Match the required functions to the exact channel chart; channel count alone does not confirm which zones or pixel effects are independently controlled.
Which control modes are supported?
DMX512, Auto, Sound and Master-Slave control are supported.
Can multiple fixtures be installed in one continuous line?
Yes. The housing is designed for seamless multi-unit splicing, allowing repeated fixtures to form a broader visual surface.
Is this light suitable for camera-based productions?
Test the selected dimming, strobe and pixel cues with the actual camera frame rate and shutter settings before the show. A fixed flicker-free specification is not claimed.
Can this product be exposed to rain?
No IP rating is included in the confirmed product data. Do not assume outdoor weather protection; use it only in a protected environment unless a suitable rated solution is confirmed.
What details should I send for a quotation?
Please provide quantity, destination, voltage and plug requirements, DMX programming needs, installation method, accessories, packing preference and delivery timing.